{"title":"Idées Cadeaux \u003c30euros","description":"","products":[{"product_id":"p_3090_proonehandclamp","title":"PRO One-Hand Clamp","description":"The PRO one-hand clamp from wolfcraft puts special emphasis on ergonomics. It is extremely versatile and, thanks to its intelligent design, offers an unrivalled work experience and secure hold. Its small size makes it ideal for smaller hands and for use in confined working spaces. The intelligent pump mechanism of the PRO allows you to not only control the successive tightening, but also safely open the clamp with just one hand. A lever release mechanism gives you full control to effortlessly and safely relieve the clamping pressure and slide the clamping jaw smoothly. Thanks to its low weight and optimal geometry, you can intuitively operate your professional clamping tool without fatigue, even during prolonged repetitive work. The ergonomically shaped 2-component handle with soft zone further increases the handling comfort. Its compact design with small handle opening width is perfect for fatigue-free use, especially with smaller hands. Applying force by hand takes almost no effort. This manual force is efficiently converted to a clamping pressure of up to 150 kg. The PRO boasts an exceptionally high holding load, providing optimal reliability for prolonged use. \u003cbr\u003e Thanks to the large rubberised clamping surfaces with a large clearance of 85 mm, the distribution of the clamping pressure is very gentle on the workpiece. They have a groove with a V-profile, which gives you a secure hold when clamping round material. Adjustable spacing guides protect the workpiece and serve as rests for clamped workpieces. Thanks to the practical 2-in-1 function, you do not need any tools to convert the one-hand clamp for use in spreading applications. The specially hardened steel rail and fibreglass-reinforced plastic (FRP) make the product robust and durable. In addition, the special perforated structure ensures an extreme load capacity and dimensional stability. The rounded corners of the rails increase on-the-job safety. The PRO one-hand clamp is available in various clamping widths and expanding ranges. You are placing your trust in top quality Made in Europe\", with a 10 year warranty.","brand":"wolfcraft","offers":[{"title":"150 mm","offer_id":55885466337665,"sku":"4006885309005","price":24.95,"currency_code":"EUR","in_stock":true},{"title":"300 mm","offer_id":55885466370433,"sku":"4006885309104","price":24.95,"currency_code":"EUR","in_stock":true},{"title":"450 mm","offer_id":55885466403201,"sku":"4006885309203","price":24.95,"currency_code":"EUR","in_stock":true},{"title":"700 mm","offer_id":55885466435969,"sku":"4006885309302","price":24.95,"currency_code":"EUR","in_stock":true},{"title":"915 mm","offer_id":55885466468737,"sku":"4006885309401","price":24.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/1174\/6177\/files\/FPNG_cba1f856-20a0-496d-a7a0-b55a83b641b9.png?v=1783423579"},{"product_id":"p_3674_doorinstallationset3pcs","title":"Door Installation Set, 3 Pcs.","description":"With this three-piece door installation set, you can easily hang, align and carry doors without any help. It includes a lifting handle made of sturdy steel as well as two hinge guides made of durable plastic. To remove a door from its hinges, slide the lifting handle between the door and frame and angle it. You can now remove and rehang the door effortlessly. The silicone sleeve ensures a non-slip hold. The lifting handle can be used for doors with material thicknesses from 2 to 5 cm. The two hinge guides have a measuring scale with 5 mm intervals. You can use them to adjust the depth of the upper and lower hinges of the frame. Then you can clamp them behind the frame’s door hinges. This provides a guide that allows you to hang the door even if you do not have a direct line of sight to the hinge pins. Ideal if you are working without a second set of hands or eyes.","brand":"wolfcraft","offers":[{"title":"Default Title","offer_id":54949635752321,"sku":"4006885367401","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/1174\/6177\/files\/FPNG_462350b3-258a-4238-990c-8e41de7b4e91.png?v=1783524333"},{"product_id":"p_4290_prosafetysnapoffbladeknife18mm","title":"PRO SAFETY Snap-Off Blade Knife, 18 mm","description":"The PRO SAFETY snap-off blade knife with extra-sharp PRO SHARP blade meets the highest professional standards. Thanks to the blade slider's convenient central position on the back of the knife, it provides optimal ergonomic handling for both left and right-handed users. It features two settings: the autolock function where you work with a fixed blade, and the safety function where the blade retracts when the slider is released. Whether cutting sheeting, carpet, wood, or other materials, the sturdy zinc die-cast metal housing ensures maximum force transmission and guarantees the product's durability. The metal blade guide further increases the stability. The PRO SAFETY snap-off blade knife is slip-resistant and comfortable to work with, thanks to the structured 2-component handle area with a soft zone. During pull cuts, finger grooves help maintain the optimal grip position. \u003cbr\u003e For maximum cutting performance, the powerful professional knife is equipped with a black PRO SHARP blade. Thanks to its special grind, this blade offers better cutting performance than conventional snap-off blades. Additionally, the knife is compatible with all customary 18-mm snap-off blades. In the removable cap of the knife, there is a slot that fits the blade, for safe and controlled segment snapping. When all segments have been used, you can quickly change the blade without needing tools, thanks to the special holder.","brand":"wolfcraft","offers":[{"title":"Default Title","offer_id":54949676745089,"sku":"4006885429000","price":17.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/1174\/6177\/files\/FPNG_2caf2c73-eb96-4bd3-9858-440367f1bfa1.png?v=1783524651"},{"product_id":"p_4640_dowelmasterdowelgaugeforwoodjoints","title":"Dowelmaster – dowel gauge for wood joints","description":"With the dowelmaster from wolfcraft, you can make perfect dowel joints at the first go even without previous knowledge. Align drill holes for corner, T-butt and edge-to-edge joints without any errors using the adjustable stop, three integrated drill guide bushes for round dowel pins and two centring bolts. The high-quality, impact-resistant plastic design and the steel drill guide bushes for 6, 8 and 10 mm dowel pins ensure outstanding stability and high durability. With its ergonomically shaped handle, the dowelmaster rests comfortably in the hand, making it a fast drill gauge for almost every work situation. \u003cbr\u003e Face drill holes and edge-to-edge joints \u003cbr\u003e Adjust the drill bit depth stop to the board thickness and dowel length (you do not need additional tools for this). Place the dowelmaster on the face edge of the board and secure it between the two centring bolts. Now you can drill into the exact centre of the face side of the board. For edge-to-edge joints, clamp both boards to the workbench. Push the dowelmaster with the guide slot over the inserted dowel pin in the first board and drill through the bush. \u003cbr\u003e Corner joints \u003cbr\u003e For corner joints, start by drilling all the holes in the face side as described above. Glue the dowel pins into the face holes and then adjust the stop of the dowelmaster to them. To do this, guide the dowel pin into the appropriate bush, align the stop with the side of the board and secure the position using the adjusting screw. Then lay the face board on the undrilled board. The dowelmaster accommodates the dowel pin in the guide slot. You can start drilling once the stop is seated firmly against the lower board edge. \u003cbr\u003e T-butt joints \u003cbr\u003e The wolfcraft dowelmaster makes short work of T-butt joints too. Once you have drilled the first board on the face side and the dowel pins are firmly glued in place, start working on the counterpart. Draw the middle of the bottom on the side board and clamp the bottom with the already glued dowel pins 4 cm away from this line. Push the dowelmaster with the correct guide slot over the dowel pin and drill through the bush on the top of the dowelmaster. Now the boards are ready to be glued.","brand":"wolfcraft","offers":[{"title":"Default Title","offer_id":54949680578945,"sku":"4006885464001","price":22.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/1174\/6177\/files\/FPNG_ab047feb-1eb3-494b-9670-39c0ca40877e.png?v=1783512147"},{"product_id":"p_4688_angulargear","title":"Angular Gear","description":"The angular gear is an indispensable drilling and screwing tool for anyone who wants to do high-precision work, even in tight spaces. Thanks to its compact design with a corner dimension of only 52 mm (incl. 25 mm bit), the angular gear is very easy to handle and enables accurate work in tight spaces. The magnetic ¼\" hexagon socket enables quick tool changes. The gear with ball bearing ensures smooth right\/left rotation for tightening and loosening. The angular gear is a practical aid for drilling and screwing at a 90° angle.","brand":"wolfcraft","offers":[{"title":"Default Title","offer_id":54949681791361,"sku":"4006885468801","price":24.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/1174\/6177\/files\/FPNG_a0408866-040a-46cf-bc9d-5412c0d26b52.png?v=1783495484"},{"product_id":"p_5208_3dmitreangle","title":"3D Mitre Angle","description":"The 3D mitre angle is made of high-quality plastic and has a wide range of uses thanks to its millimetre and angular scales. This marking tool allows you to easily take measurements and transfer them onto beams, pipes and three-dimensional workpieces. Its rectangular geometry allows you to make precise markings around corners – ideal for accurately transferring mitre angles onto two sides of a workpiece. With limit stops at 45° and 90° angles and a scale for free angles between 0° and 90°, you will be prepared for anything. The 3D mitre angle provides you with a reliable marking gauge when marking parallel lines. It is also equipped with a drill gauge for quickly determining the diameter of a drill bit.","brand":"wolfcraft","offers":[{"title":"Default Title","offer_id":54949713314177,"sku":"4006885520806","price":6.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/1174\/6177\/files\/FPNG_320ad4e7-c84f-4915-90dd-0c47771d66de.png?v=1783518341"},{"product_id":"p_8626_projectsetforrightangleclamping","title":"Project Set for Right-Angle Clamping","description":"With this project set for right-angle clamping on all 4 corners, you are optimally equipped to fix and clamp shelves, picture frames and pieces of furniture. The set includes 4 corner clamps for boards with a thickness of 10-22 mm and can be mounted and released with only one hand. Thanks to the spring mechanism, they automatically adapt to the board thickness. It is also possible to clamp together boards with different thicknesses. The clamping surfaces have a soft, non-slip contact surface that fasten the workpiece firmly in place without making pressure marks. 4 practical mounting aids for screwing or gluing boards together at a 90° angle.","brand":"wolfcraft","offers":[{"title":"Default Title","offer_id":54949757288833,"sku":"4006885862609","price":22.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/1174\/6177\/files\/FPNG_106d3d52-5107-4209-88e7-47fdf1ae3545.png?v=1783525848"},{"product_id":"p_8661_deepholemarkerset","title":"Deep Hole Marker Set","description":"The deep hole marker is the perfect tool when you want to make marks in hard-to-reach places. With its thin grey universal lead with a diameter of 2.8 mm and a slimline lead shaft with a diameter of just 5.7 mm, you can conveniently make marks in holes up to 4 cm deep – ideal for use in drill holes. During work with templates, the deep hole marker offers impressively precise edge guidance. It features an ergonomic plastic handle area with finger grooves and a ribbed surface for comfortable and non-slip use. The 120 mm long universal lead ensures clearly visible marks on surfaces like plasterboard, plastic, metal, stone, concrete, processed wood and laminate. They can be easily removed again with a damp cloth or rubber to finish. The lead is easy to feed out bit by bit using the push-button mechanism; the sturdy metal lead guide protects it from breaking. When maximum marking precision is required, sharpen the lead to a fine point with the sharpener integrated in the push-button cap. To refill the marker when needed, simply unscrew the push-button cap and add the refill leads (available separately). With the included grey and yellow refill leads, you are well-equipped to keep using the marker for a long time to come. The grey universal leads are ideal for making visible marks on light surfaces, while the yellow universal leads provide high visibility marks on dark surfaces. The transparent protective case helps you to store the leads neatly and transport them without breaking.","brand":"wolfcraft","offers":[{"title":"Default Title","offer_id":54949759091073,"sku":"4006885866102","price":16.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/1174\/6177\/files\/FPNG_bec867d3-0ecc-40b9-b229-736e16cea01b.png?v=1783526008"}],"url":"https:\/\/shop.wolfcraft.com\/en-de\/collections\/idees-cadeaux-30euros.oembed","provider":"wolfcraft Shop","version":"1.0","type":"link"}